FireFly3

Version 14 (Anthony Rowe, 02/10/2012 12:20 pm)

1 1 Anthony Rowe
h1. FireFly Version 3
2 5 Anthony Rowe
3 11 Anthony Rowe
The FireFly 3 is an ATmega128rfa1 powered wireless sensor device with the following specifications:
4 12 Anthony Rowe
5 11 Anthony Rowe
 * 16MHz with 32KHz low-power clock
6 11 Anthony Rowe
 * Integrated 802.15.4 compatible 2.4GHz radio
7 11 Anthony Rowe
 * 16KB RAM, 128KB FLASH, and 4KB EEPROM
8 11 Anthony Rowe
 * 2 UARTS, I2C, SPI, GPIO, ADC
9 11 Anthony Rowe
10 13 Anthony Rowe
Previous FireFly version information available here: [[FireFly]]
11 13 Anthony Rowe
12 9 Anthony Rowe
h2. FireFly Development Board
13 9 Anthony Rowe
14 5 Anthony Rowe
!ff3-dev.jpg!
15 6 Anthony Rowe
16 9 Anthony Rowe
h2. FireFly Environmental Sensor Board
17 9 Anthony Rowe
18 14 Anthony Rowe
FireFly micro with environmental sensing board with the following sensors:
19 14 Anthony Rowe
20 14 Anthony Rowe
 * Light
21 14 Anthony Rowe
 * Temperature
22 14 Anthony Rowe
 * Pressure
23 14 Anthony Rowe
 * 3-axis acceleration
24 14 Anthony Rowe
 * Humidity
25 14 Anthony Rowe
 * PIR Motion
26 14 Anthony Rowe
 * Switch contact
27 14 Anthony Rowe
28 7 Anthony Rowe
!ff3-env-sensor.jpg!
29 9 Anthony Rowe
30 9 Anthony Rowe
h2. FireFly Plug Meter and Control Board
31 8 Anthony Rowe
32 10 Anthony Rowe
 * 1 outlet (110-240VAC)
33 10 Anthony Rowe
 * Mechanical relay switching
34 10 Anthony Rowe
 * RMS Current, RMS Voltage, True Power, Apparent Power, Reactive Power, Power Factor
35 10 Anthony Rowe
 * 2KHz Sampling Rate
36 10 Anthony Rowe
 * 1W resolution with 1700W max load
37 10 Anthony Rowe
 * Local processing support asynchronous pushing of power events on change
38 10 Anthony Rowe
39 8 Anthony Rowe
!ff3-plug-front.jpg! !ff3-plug-back.jpg!