Version 1/8 - Next ยป - Current version
Anthony Rowe, 02/12/2008 01:38 pm


Sensor Andrew Gateway Setup Notes

1) gumstix build r1161 * svn co -r1161 http://svn.gumstix.com/gumstix-buildroot/trunk gumstix-buildroot

2) Add the following files: * avrdude * avrdude.conf * dump.sh * eeprom-config * ff-set-fuses * prg-node.sh * slipstream_server

3) Add Sensor Andrew User: * login as root {{{
adduser sauser
}}} * add permission for serial port etc (this is a total hack) {{{
vi /etc/passwd
change:
sauser:x:1001:1001:Linux User,,,:/home/sauser:/bin/sh
to
sauser:x:1001:0:Linux User,,,:/home/sauser:/bin/sh
}}}

cut.jpg - Cut RX trace on gumstix Console board (209.7 kB) Anthony Rowe, 10/19/2008 12:47 am

gumstix-bottom.jpg - Bottom View of Gumstix (418.5 kB) Anthony Rowe, 10/19/2008 12:47 am

gumstix-top.jpg - Top View of Gumstix (266.3 kB) Anthony Rowe, 10/19/2008 12:47 am