« Previous - Version 6/8 (diff) - Next » - Current version
Anthony Rowe, 10/19/2008 12:54 am


Connecting Gumstix to FireFly Node
First, cut the RX trace's connection to the level shifter chip. The level shifter chip is normally pulling the RX line and this needs to be released so that the FireFly board can override it.

Image(cut.jpg,400)

Next wire up the power and serial lines as shown below:

Image(gumstix-bottom.jpg,400)

Image(gumstix-top.jpg,400)

Finally, you might want to remove the serial console from ttyS0 since now the FireFly board is connected to it. Be sure you have an alternative way of communicating. For example set it to communicate using ttyS1 or have a network connection working. To disable the console on ttyS0, edit /etc/inittab and comment out: {{{
::respawn:/sbin/getty -L ttyS0 115200 vt100
}}}

Sensor Andrew Gateway Testbed Setup Notes

1) gumstix build r1161 * svn co -r1161 http://svn.gumstix.com/gumstix-buildroot/trunk gumstix-buildroot

2) Add the following files: * avrdude * avrdude.conf * dump.sh * eeprom-config * ff-set-fuses * prg-node.sh * slipstream_server

3) Add Sensor Andrew User: * login as root {{{
adduser sauser
}}} * add permission for serial port etc (this is a total hack) {{{
vi /etc/passwd
change:
sauser:x:1001:1001:Linux User,,,:/home/sauser:/bin/sh
to
sauser:x:1001:0:Linux User,,,:/home/sauser:/bin/sh
}}}

4) remove serial console * edit /etc/inittab * comment out {{{
::respawn:/sbin/getty -L ttyS0 115200 vt100
}}}

5) setup ssh * make .ssh dir on gumstix node * On desktop server run (if key doesn't already exist) {{{
ssh-keygen -t dsa -f .ssh/id_dsa
// generates id_dsa and id_dsa.pub
scp id_dsa.pub user@remote:~/.ssh/id_dsa.pub
// copy the file to the .ssh dir of the gumstix
}}} * Set it up on the gumstix {{{
local> ssh user@remote
remote> cd .ssh
remote> cat id_dsa.pub >> authorized_keys
remote> chmod 640 authorized_keys
remote> rm id_dsa.pub
remote> exit
}}}

cut.jpg - Cut RX trace on gumstix Console board (209.7 kB) Anthony Rowe, 10/19/2008 12:47 am

gumstix-bottom.jpg - Bottom View of Gumstix (418.5 kB) Anthony Rowe, 10/19/2008 12:47 am

gumstix-top.jpg - Top View of Gumstix (266.3 kB) Anthony Rowe, 10/19/2008 12:47 am